Silo Chutes

Stamped edges of chute fit into silo wall on either side of doorframes as silo is built. DeMuth "S" lock seams connect adjacent sheets. Hardware is supplied with chute. Available in galvalume or white. Note: Less than standard pack add 20% surcharge where applicable. Rails are interchangeable.

Special Rails bolt to chute edges. Sheets are clamped to silo rods during installation. "S" lock seams connect adjacent sheets. Projecting, flattended edges of chute can be notched for close fit around rods. Rails are interchangeable, right and left are supplied. Hardware is supplied with chute. Available in galvalume or white. Thickness is .022" minimum!

Special Left and Right Rails bolt to chute edges. Chute clips attach rails to silo rods at any position along rails. Lock seams connect adjacent sheets. Chute aprons can be notched for close fit around rods. COMPLETE Hardware is boxed for ease of shipping and inventory control. Available in galvalume or white. Thickness is .022" minimum!

Note: Less than standard pack, add 20% surcharge where applicable.

DeMuth's Fiberdome chute is designed and engineered to be installed on most type silos. It's structure allows it to withstand the toughest beating the weather elements or silo unloading systems can possibly dish out.

The chute is constructed in full 7-1/2' sections to minimize the number of joints. Connecting joints have a 2-1/2" tongue and groove design to keep feed in and water out. The large ribbed construction adds stability and strength. Rails are interchangeable.

Contact DeMuth for all your silo chute needs.